Getting your house exterior painted is a lifetime investment in your property. River City Painting goes the extra mile to ensure the promised results without any inconvenience.
House exterior painting is not a job for an amateur and is not a DIY assignment too. Several tools and materials are required for an efficient paint job; you can obtain all the painting materials from a paint supplier. Trusting an amateur for the job will cost you more than you intend to save.
An efficient procedure needs to be followed to gain the most benefits from your home exterior paint job. The key is to follow the steps attentively to make it a successful project.
Ensure the available materials and tools, or make your painting contractor do it for you, including various brushes, power washers, ladders, etc. Doing it yourself would cost you more money and tension, so hire our painting contractors for better reasons and results.
1. List of Materials and Tools
Your exterior painting contractor in Helotes is bound to have the stock available at the time of need to prevent any hindrance. Which include some essentials like:
- Paintbrush
- Pressure Washer
- Exterior Semi-Gloss Paint
- Stain-Blocking Primer
- Plastic Sheeting
- Exterior Caulk
- Medium-Grit Sanding Block
- Ladder
- Paint Sprayer
- Spackle Knife
- Caulk Gun
- Paint Scraper
- Epoxy Filler
- Exterior Eggshell Paint
- Drop Cloths
- Painter's Tape
2. Power Washing
It is essential to power wash a house before getting started on painting. The house exterior will have piles of dust and dirt, including cracks and other damages. Covering up the whole outer structure of the house will require the used ladder and its safety accessories, which is why it is a wise choice to hire a professional painting contractor in Helotes to lead the project rather than do it yourself.
The efficient rule of using a ladder for either interior or exterior repair work on a site is a 1:4 ratio. That means whenever you open the ladder 1 step move it 4 steps away from the wall base for ideal inclination. Make sure the ladder is locked perfectly, and there is no chance of tripping without external interference.
When climbing a ladder, always use the rungs rather than the rails, and keep your hips close as you ascend. Avoid overreaching in any direction, as this is one of the surest ways to have an accident.
Take Serious Precautions With Tools
The best approach to using these tools in a painting job is to ensure the safety precautions are fully intact. For instance, whenever you climb on a ladder for any purpose, use rungs instead of rails to increase the chances of safety, and never try to overreach while you are on a ladder.
Following the rules of gravity in this kind of job is inevitable for optimal results. While power washing, it is essential to point the direction of hose pressure downwards so the water doesn't get inside the siding panels. The hand needs to be slow and consistent rather than otherwise.
3. Make Up The Damages
The damaged surfaces of the house or workplace need to be dealt with earlier in the painting stage. In this step, the overall exterior is inspected to find damages on the siding, roofing, the exterior of the main door, etc. Fill the cracks in the walls using epoxy fillers to fix the walls, then use a sanding block after the filler dries to smooth the surface.
4. Loose Paint Removal
Flaky paint can only hinder your goal of enhancing the outer beauty of your house if you don't deal with it correctly. Use a paint scraper or a sanding block to remove loose paint from the wall. To achieve task efficiency without endangering any life or property, follow safety instructions regarding ladders for higher levels of the walls.
5. Fill in Gaps with Caulk Gun
After a renovation project, it is easy to notice gaps between the baseboards and walls or between door frames and walls. Even if you had any renovation recently, but the same materials aren't used in the construction of your house in the first place, then these gaps will start to show up after a while.
It would be best to fill those gaps to finish your house painting job at a right turn. Use a caulk gun and an efficient amount of caulk and follow proper instructions or let your painting contractor do it. They will have a better understanding of the situation and more experience handling it.
6. Cover up Valuables
Pack up all your windows and doors with plastic sheets or paper so they won't get spoiled in the painting step. Using proper tools in the process of exterior painting your house is recommended. This way, you get to stay from any danger regarding the safety measures of the project and complete it within the confinement of a safe environment.
7. Priming Stage
Finding a suitable primer is essential, as you must use different wood and brick primers. The difference is the adhesion capability of the wall material with the primer. Apply a coat of stain-blocking primer to cover up the walls' stains and have a cleaner exterior to paint.
After knowing the detailed description and responsibilities of the job, you know this isn't a one-person job. Contact River City Painting today and discuss your needs with our residential painting contractors. We will provide you with the best guidance in Helotes on residential exterior painting projects.